57-1000487-01: Brocade 32Gb Shortwave SFP28 Optical Transceiver
Also listed as: 57-1000488-01, XBR-000212, SP32-SW-01
The Brocade 57-1000487-01 is a 32Gb Fibre Channel Shortwave SFP28 hot-pluggable optical transceiver operating over 850nm multimode fibre for Gen 6 and Gen 7 SAN switches.
Specifications
| Part number | 57-1000487-01 |
|---|---|
| Brand | Brocade |
| Type | Transceivers |
| Other numbers | 57-1000488-01, XBR-000212, SP32-SW-01 |
| Status | current |
| Form factor | SFP28 |
| Speed | 32Gb FC |
| Wavelength nm | 850 |
| Connector | LC duplex |
| Cable type | Multimode Fibre (OM3/OM4) |
| Max distance m | 100 |
About the 57-1000487-01
The Brocade 57-1000487-01 is a factory certified 32Gb Shortwave SFP28 optical transceiver engineered specifically for Gen 6 Fibre Channel SAN fabrics. Operating at 850nm over multimode optical links, it provides line-rate transmission up to 100 meters on OM4 multimode cabling and up to 70 meters on OM3 cabling. It supports low-latency storage data transfer and includes digital optical monitoring telemetry accessible via Fabric OS.
Compatibility
Designed for native installation in Brocade G610, G620, G630, G720, and G730 SAN switches. It auto-negotiates link rates with 16Gb and 8Gb Fibre Channel host bus adapters and storage array target ports. It is also deployed in OEM switch variants branded by Dell, HPE, and Lenovo, ensuring full interoperability across heterogeneous enterprise storage environments.
How to identify a genuine unit
Distinguished by a metallic SFP28 enclosure with an integrated red or beige release bail clasp. The white factory label displays Brocade part number 57-1000487-01, optical laser safety classification ratings, and a 2D matrix serial barcode. When queried through the Fabric OS command-line interface using sfpshow, the transceiver reports genuine Brocade vendor identifiers and optical power values.
Buying used
When purchasing used 32Gb transceivers, perform optical inspection of the LC receiver and transmitter bores to ensure no debris or scratches obstruct the optical path. Verify that the wire bail latch moves smoothly and locks into the switch cage without mechanical play. Always insert the transceiver into a live switch port to verify calibrated RX and TX optical levels within acceptable decibel margins.
Fits these models
- Brocade G-Series G610
- Brocade G-Series G620
- Brocade G-Series G630
- Brocade G-Series G720
- Brocade G-Series G730
Works together
How the Brocade 57-1000487-01 connects to servers, storage and the network: 1 way, with the hardware on each path.
Fibre Channel SAN
Match the speed: 16Gb and 32Gb FC HBAs, switches and array ports work together, and each generation also runs one or two speeds below its own (a 32Gb port runs at 16Gb and 8Gb).
Adapters for the server
540-BCMS Dell QLogic 2770 Single Port 32Gb Fibre Channel PCIe Adapter
540-BCMT Dell QLogic 2772 Dual Port 32Gb Fibre Channel PCIe Adapter
540-BCMU Dell Emulex LPe35002 Dual Port 32Gb Fibre Channel PCIe Adapter
540-BDLM Dell Emulex LPe36002 Dual Port 64Gb Fibre Channel Host Bus Adapter
Switches
Storage
Dell PowerStore 1000T 2U rack
Dell PowerStore 1000X 2U rack
Dell PowerStore 1200T 2U rack
Dell PowerStore 3000T 2U rack
Dell PowerStore 3200T 2U rack
Dell PowerStore 5000T 2U rack
Plan and size it
- Draw this setup in the topology planner mrplanb.com
- Add up rack power and space rack-density.com
- Virtualization storage Ledger: scored storage platforms mrplanb.com
- SAN transport and NVMe over FC for backup mrplanb.com
Check compatibility with Brocade
Before you buy, confirm the exact configuration against the vendor's own lists: firmware levels, operating systems, adapters and optics that Brocade has tested with the Brocade 57-1000487-01.
- Compatibility Brocade Fibre Channel support and compatibility documents (Broadcom)
- Support Broadcom Support Portal
FAQ
Can the Brocade 57-1000487-01 run at lower speeds?
Yes, it auto-negotiates to 32Gb, 16Gb, and 8Gb Fibre Channel rates depending on the connected device.
What optical patch cord is required for this 32G transceiver?
Standard 50/125 micron OM3 or OM4 multimode fibre with duplex LC connectors is required.
Buying or selling 57-1000487-01?
New, refurbished or used. Tell us the quantity and condition and we connect you with a vetted reseller in your region, usually within one working day.
Sources
- Brocade Transceiver Modules Guide, checked 2026-10-27