Home › Servers › Dell

Dell PowerEdge R240

End of saleServers1U rack
Dell PowerEdge R2401U rack4 × LFF 3.5" bays1 socket4 DIMMs

The Dell PowerEdge R240 is an enterprise 1U rack server powered by 1 Intel Xeon E-2100 and E-2200 Series, Core i3, or Pentium Processors (up to 8 cores, 95W TDP) and 4 memory slots supporting up to 64GB DDR4-2666 ECC UDIMM. Configured with Up to 4x 3.5-inch cabled or hot-swap SAS/SATA drives and Up to 2 PCIe Gen3 slots, the R240 delivers balanced compute and I/O density for enterprise database, hypervisor, and application workloads.

Also written as: PowerEdge R240, Dell R240, R240 1U Server

Buy Dell PowerEdge R240Sell yours

Specifications

BrandDell
FamilyPowerEdge R
Form factor1U rack
ReleasedNov 2018
End of saleOct 2022
End of supportNov 2027
Cpu sockets1
Cpu platformIntel Xeon E-2100 and E-2200 Series, Core i3, or Pentium Processors (up to 8 cores, 95W TDP)
Memory slots4
Memory typeDDR4-2666 ECC UDIMM
Memory max (GB)64
Drive baysUp to 4x 3.5-inch cabled or hot-swap SAS/SATA drives
Pcie slotsUp to 2 PCIe Gen3 slots
Gpu supportNone supported
Network onboard2x 1GbE LOM ports; 1x 1GbE iDRAC9 port
Power supplySingle cabled 250W or 450W Bronze PSU

Generations

About the R240

The Dell PowerEdge R240 is an enterprise 1U rack server engineered for computing and virtualization workloads. Powered by 1 Intel Xeon E-2100 and E-2200 Series, Core i3, or Pentium Processors (up to 8 cores, 95W TDP) across 4 memory slots supporting up to 64GB DDR4-2666 ECC UDIMM, the R240 balances throughput and memory capacity. In Dell's server catalog, the R240 succeeded the POWEREDGE-R230 and was followed by the POWEREDGE-R250, positioned alongside rival systems including PROLIANT-DL20-GEN10.

Options and compatibility

Processor support on the R240 utilizes 1 LGA1151 sockets with thermal heatsinks matching CPU power envelopes. System memory slots on the R240 require DDR4-2666 ECC UDIMM modules, and mixing RDIMM with LRDIMM memory is not supported. The R240 chassis utilizes X7K8W (3.5-inch LFF) drive trays across its 3.5-inch storage bays. Networking on the R240 uses Network Daughter Card (NDC), and expansion cards install into Up to 2 PCIe Gen3 slots risers.

How to identify it

Physical identification of the R240 is verified by the 14th-generation silver-gray brushed aluminum honeycomb bezel with the R240 badge on the front chassis ear. The pull-out information tag on the R240 control panel displays the 7-character Dell Service Tag and default login credentials. In iDRAC9, the server identifies as R240 with active firmware, slot mapping, and power telemetry.

Buying used

When evaluating a pre-owned R240, inspect the LGA1151 CPU socket pins for damage and ensure retention clips are intact. Run Dell ePSA diagnostics across all 4 memory slots of the R240 to verify zero uncorrectable ECC faults under load. Verify that redundant power supplies in the R240 match in wattage and that iDRAC9 Enterprise remote console is enabled. Ensure required R240 drive caddies and bracket accessories are present.

Reference prices (last 12 months, updated 2026-10-27)

New: AED 930 (1 sighting, Oct 2026)

All sightings
SellerConditionPriceNoteSeen
neotech.aenewAED 930sale2026-10-27

Prices seen on public listings on the dates shown, before tax and shipping. Not an offer.

Compatible parts

RAID controllers

Works together

How the Dell PowerEdge R240 connects to servers, storage and the network: 4 ways, with the parts and products on each path.

Fibre Channel SANiSCSI and NVMe/TCP over EthernetDirect-attached SASFile storage (NFS and SMB)

Fibre Channel SAN

Match the speed: 16Gb and 32Gb FC HBAs, switches and array ports work together, and each generation also runs one or two speeds below its own (a 32Gb port runs at 16Gb and 8Gb).

Adapters for the server (check the fit list)

Switches

Storage

Optics

Fibre Channel SAN: how it fits together

iSCSI and NVMe/TCP over Ethernet

Keep the speed the same at all three points: a 25GbE server, a 25GbE switch port and a 25GbE array port. Mixed speeds work but the slowest link sets the pace.

Adapters for the server (check the fit list)

iSCSI and NVMe/TCP over Ethernet: how it fits together

Direct-attached SAS

12Gb SAS uses Mini-SAS HD (SFF-8644) connectors; older 6Gb gear uses Mini-SAS (SFF-8088). Adapter cables exist, but the link runs at the slower speed.

Adapters for the server (check the fit list)

Storage

Direct-attached SAS: how it fits together

File storage (NFS and SMB)

Front-end ports face the clients; back-end ports (on scale-out systems) connect the nodes to each other and need their own switch pair.

Adapters for the server (check the fit list)

Storage

File storage (NFS and SMB): how it fits together

Plan and size it

Equivalent models from other brands

FAQ

How deep is the PowerEdge R240?

The R240 is approximately 23.5 inches (59.6 cm) deep, making it suitable for shallow racks.

Can the R240 take registered RDIMMs?

No, it only supports unbuffered ECC UDIMMs; RDIMMs will prevent the system from posting.

Buying or selling R240?

New, refurbished or used. Tell us the quantity and condition and we connect you with a vetted reseller in your region, usually within one working day.

Sources