Home › Storage › Dell

Dell Unity XT 380F

CurrentStorage2U rack
Dell Unity XT 380F2U rack25 × SFF 2.5" baysmax 128 GB

The Dell PowerEdge 380F is an enterprise 2U rack server powered by 2 Dual active-active storage processors (SPs), Intel Xeon Skylake 6-core (1.7 GHz) per SP and 24 memory slots supporting up to 128GB DDR4 ECC Registered RDIMM. Configured with Up to 25x 2.5-inch SAS SSDs in base DPE; expands up to 500 all-flash SSDs across DAEs and PCIe expansion risers, the 380F delivers balanced compute and I/O density for enterprise database, hypervisor, and application workloads.

Also written as: Unity XT 380F, Dell EMC Unity XT 380F, Unity 380F All-Flash

Buy Dell Unity XT 380FSell yours

Specifications

BrandDell
FamilyUnity XT
Form factor2U rack
ReleasedMay 2019
Cpu platformDual active-active storage processors (SPs), Intel Xeon Skylake 6-core (1.7 GHz) per SP
Memory max (GB)128
Drive baysUp to 25x 2.5-inch SAS SSDs in base DPE; expands up to 500 all-flash SSDs across DAEs
Raw capacityUp to 2.4 PB raw capacity (up to 7.2 PB effective with 3:1 data reduction)
Network onboard4-port 10GbE / 1GbE Base-T; 2x I/O module slots per SP supporting 16Gb/32Gb FC or 25GbE
Power supplyDual redundant hot-plug 1050W Platinum power supplies

Generations

About the 380F

The Dell PowerEdge 380F is an enterprise 2U rack server engineered for computing and virtualization workloads. Powered by 2 Dual active-active storage processors (SPs), Intel Xeon Skylake 6-core (1.7 GHz) per SP across 24 memory slots supporting up to 128GB DDR4 ECC Registered RDIMM, the 380F balances throughput and memory capacity. In Dell's server catalog, the 380F succeeded the UNITY-350F and was followed by the POWERSTORE-500T, positioned alongside rival systems including PURE-STORAGE-FLASHARRAY-X10, NETAPP-AFF-A150.

Options and compatibility

Processor support on the 380F utilizes 2 embedded dual storage controllers sockets with thermal heatsinks matching CPU power envelopes. System memory slots on the 380F require DDR4 ECC Registered RDIMM modules, and mixing RDIMM with LRDIMM memory is not supported. The 380F chassis utilizes proprietary array drive carrier drive trays across its 2.5-inch drive backplane bays. Networking on the 380F uses optical front-end host I/O modules, and expansion cards install into PCIe expansion risers risers.

How to identify it

Physical identification of the 380F is verified by the Dell EMC enterprise storage array front fascia with the 380F badge on the front chassis ear. The pull-out information tag on the 380F control panel displays the 7-character Dell Service Tag and default login credentials. In Array Management Controller, the server identifies as 380F with active firmware, slot mapping, and power telemetry.

Buying used

When evaluating a pre-owned 380F, inspect the embedded dual storage controllers CPU socket pins for damage and ensure retention clips are intact. Run Dell ePSA diagnostics across all 24 memory slots of the 380F to verify zero uncorrectable ECC faults under load. Verify that redundant power supplies in the 380F match in wattage and that Array Management Controller Enterprise remote console is enabled. Ensure required 380F drive caddies and bracket accessories are present.

Works together

How the Dell Unity XT 380F connects to servers, storage and the network: 3 ways, with the parts and products on each path.

Fibre Channel SANiSCSI and NVMe/TCP over EthernetFile storage (NFS and SMB)

Fibre Channel SAN

Match the speed: 16Gb and 32Gb FC HBAs, switches and array ports work together, and each generation also runs one or two speeds below its own (a 32Gb port runs at 16Gb and 8Gb).

Servers

Adapters for the server

Switches

Optics

Fibre Channel SAN: how it fits together

iSCSI and NVMe/TCP over Ethernet

Keep the speed the same at all three points: a 25GbE server, a 25GbE switch port and a 25GbE array port. Mixed speeds work but the slowest link sets the pace.

Servers

Adapters for the server

Switches

Optics

iSCSI and NVMe/TCP over Ethernet: how it fits together

File storage (NFS and SMB)

Front-end ports face the clients; back-end ports (on scale-out systems) connect the nodes to each other and need their own switch pair.

Servers

Adapters for the server

Switches

Optics

File storage (NFS and SMB): how it fits together

Plan and size it

Check compatibility with Dell

Before you buy, confirm the exact configuration against the vendor's own lists: firmware levels, operating systems, adapters and optics that Dell has tested with the Dell Unity XT 380F.

Equivalent models from other brands

FAQ

Can spinning hard drives be added to a Unity XT 380F?

No, the 380F is an all-flash array and only accepts certified SAS solid-state drives.

What data reduction is available on the 380F?

Unity OE includes inline deduplication and compression, delivering up to 3:1 data reduction.

Buying or selling 380F?

New, refurbished or used. Tell us the quantity and condition and we connect you with a vetted reseller in your region, usually within one working day.

Sources