540-BBHB: Dell Broadcom 57414 Dual Port 10/25GbE SFP28 OCP 3.0 Mezzanine Network Adapter

Also listed as: 047R24, 47R24, BCM957414M4140C · made by Broadcom

The Dell 540-BBHB is a Dell Broadcom 57414 Dual Port 10/25GbE SFP28 OCP 3.0 Mezzanine Network Adapter delivering 25GbE network connectivity across 2x 10/25GbE SFP28 ports via PCIe 3.0 x8 OCP 3.0. Built with Broadcom controller architecture, the 540-BBHB provides hardware offload acceleration and virtualization support for R750, R650, R760, R660 enterprise servers.

Specifications

About the 540-BBHB

The Dell 540-BBHB is a Dell Broadcom 57414 Dual Port 10/25GbE SFP28 OCP 3.0 Mezzanine Network Adapter engineered to deliver 25GbE network transmission across 2x 10/25GbE SFP28 ports over PCIe 3.0 x8 OCP 3.0. Powered by Broadcom controller architecture on the 540-BBHB, it executes hardware-level protocol processing, RoCE, and SR-IOV virtualization while maintaining a thermal envelope of approximately 15W. In Dell's networking portfolio, 540-BBHB provides dedicated high-bandwidth fabric connectivity for clustered virtualization, network storage, and enterprise database hosts.

Compatibility

Engineered for Dell PowerEdge servers including R750, R650, R760, R660, the 540-BBHB mounts directly into OCP NIC 3.0 Small Form Factor (SFF) with pull tab or ejector latch locations. The 540-BBHB slides into the rear OCP 3.0 mezzanine bay with an ejection latch, preserving PCIe riser slots. Cabling the 540-BBHB requires 25GbE-rated media, including direct attach copper twinaxial assemblies, optical transceivers, or patch leads matched to its physical ports. Supported operating systems on the 540-BBHB include VMware ESXi, Red Hat Enterprise Linux, and Windows Server with native Dell drivers.

How to identify a genuine unit

Authentic Dell 540-BBHB units carry an identification label displaying DP/N 047R24 and Broadcom model code BCM957414M4140C along with Dell regulatory marks. In iDRAC Network Devices inventory, the card registers under part number 540-BBHB with active link state, port MAC addresses, negotiated speed, and certified Dell firmware. Onboard physical indicators on the 540-BBHB provide link status and port activity monitoring.

Buying used

When purchasing a pre-owned 540-BBHB, examine the gold edge connector fingers for scratches, peeling contacts, or missing surface-mount capacitors. Ensure that the 540-BBHB OCP pull-latch mechanism is intact and properly aligned for chassis installation. Validate in iDRAC Lifecycle Controller that the 540-BBHB is recognized with certified Dell firmware and passes diagnostics under sustained 25GbE network traffic.

Fits these models

• Dell PowerEdge R750
• Dell PowerEdge R650
• Dell PowerEdge R760
• Dell PowerEdge R660
• Dell PowerEdge R7525

Works together

How the Dell 540-BBHB connects to servers, storage and the network: 3 ways, with the hardware on each path.

Plan and size it

• Draw this setup in the topology planner mrplanb.com
• Add up rack power and space rack-density.com
• iSCSI explained mrplanb.com
• Virtualization storage Ledger: scored storage platforms mrplanb.com
• Network monitoring tools compared mrplanb.com
• Dell E-Lab Navigator (Dell interoperability) dell.com

Equivalent part numbers

• Broadcom BCM957414 OCP3 Broadcom NetXtreme-E 10/25G OCP 3.0 SFF NIC

FAQ

Sources

• Dell Broadcom 57414 OCP 3.0 Details, checked 2026-10-27