Home › Servers › Dell

Dell PowerEdge XR5610

CurrentServers1U rack
Dell PowerEdge XR56101U rack4 × SFF 2.5" bays1 socket8 DIMMs

The PowerEdge XR5610 is a single-socket 1U rugged edge server optimized for telecom Open RAN distributed units (DU) and defense edge networking. Engineered with a short 17-inch depth, front I/O accessibility, and NEBS Level 3 compliance, it delivers high performance in challenging physical locations.

Also written as: PowerEdge XR5610, Dell XR5610, XR5610 Rugged Edge Server

Buy Dell PowerEdge XR5610Sell yours

Specifications

BrandDell
FamilyPowerEdge XR
Form factor1U rack
ReleasedMar 2023
Cpu sockets1
Cpu platform4th Gen Intel Xeon Scalable processor
Memory slots8
Memory typeDDR5 ECC RDIMM up to 4800 MT/s
Drive baysUp to 4x 2.5in NVMe SSDs
Pcie slotsUp to 3x PCIe Gen5 slots and OCP 3.0 mezzanine
Chassis depthShort-depth 17 inches (430mm)
Operating temp-5C to 55C continuous operating range

Generations

Compatible parts

HBAs

Boot devices

RAID controllers

Works together

How the Dell PowerEdge XR5610 connects to servers, storage and the network: 4 ways, with the parts and products on each path.

Fibre Channel SANiSCSI and NVMe/TCP over EthernetDirect-attached SASFile storage (NFS and SMB)

Fibre Channel SAN

Match the speed: 16Gb and 32Gb FC HBAs, switches and array ports work together, and each generation also runs one or two speeds below its own (a 32Gb port runs at 16Gb and 8Gb).

Adapters for the server (check the fit list)

Switches

Storage

Optics

Fibre Channel SAN: how it fits together

iSCSI and NVMe/TCP over Ethernet

Keep the speed the same at all three points: a 25GbE server, a 25GbE switch port and a 25GbE array port. Mixed speeds work but the slowest link sets the pace.

Adapters for the server (check the fit list)

Switches

Storage

Optics

iSCSI and NVMe/TCP over Ethernet: how it fits together

Direct-attached SAS

12Gb SAS uses Mini-SAS HD (SFF-8644) connectors; older 6Gb gear uses Mini-SAS (SFF-8088). Adapter cables exist, but the link runs at the slower speed.

Adapters for the server (check the fit list)

Storage

Direct-attached SAS: how it fits together

File storage (NFS and SMB)

Front-end ports face the clients; back-end ports (on scale-out systems) connect the nodes to each other and need their own switch pair.

Adapters for the server (check the fit list)

Switches

Storage

Optics

File storage (NFS and SMB): how it fits together

Plan and size it

Check compatibility with Dell

Before you buy, confirm the exact configuration against the vendor's own lists: firmware levels, operating systems, adapters and optics that Dell has tested with the Dell PowerEdge XR5610.

Equivalent models from other brands

FAQ

What specific telecom roles target the PowerEdge XR5610?

The XR5610 is built specifically for vRAN/Open RAN Distributed Unit (DU) deployments with Intel vRAN Boost acceleration and ultra-low latency timing support.

What power supply options exist for the XR5610?

It supports redundant hot-plug AC power supplies as well as -48V DC power supplies tailored for telecom cell-site battery backup plants.

Buying or selling XR5610?

New, refurbished or used. Tell us the quantity and condition and we connect you with a vetted reseller in your region, usually within one working day.

Sources