Home › Servers › Dell

Dell PowerEdge R350

CurrentServers1U rack
Dell PowerEdge R3501U rack8 × SFF 2.5" bays1 socket4 DIMMs

The Dell PowerEdge R350 is an enterprise 1U rack server powered by 1 Intel Xeon E-2300 Series or Intel Pentium Processors (up to 8 cores, 95W TDP) and 4 memory slots supporting up to 128GB DDR4-3200 ECC UDIMM. Configured with Up to 8x 2.5-inch hot-swap SAS/SATA or 4x 3.5-inch hot-swap SAS/SATA drives and Up to 3 PCIe Gen4 slots, the R350 delivers balanced compute and I/O density for enterprise database, hypervisor, and application workloads.

Also written as: PowerEdge R350, Dell R350, R350 1U Server

Buy Dell PowerEdge R350Sell yours

Specifications

BrandDell
FamilyPowerEdge R
Form factor1U rack
ReleasedOct 2021
Cpu sockets1
Cpu platformIntel Xeon E-2300 Series or Intel Pentium Processors (up to 8 cores, 95W TDP)
Memory slots4
Memory typeDDR4-3200 ECC UDIMM
Memory max (GB)128
Drive baysUp to 8x 2.5-inch hot-swap SAS/SATA or 4x 3.5-inch hot-swap SAS/SATA drives
Pcie slotsUp to 3 PCIe Gen4 slots
Gpu supportNone supported
Network onboard2x 1GbE LOM ports; 1x 1GbE iDRAC port
Power supplyDual redundant hot-plug 600W Platinum or single cabled 450W

Generations

About the R350

The Dell PowerEdge R350 is an enterprise 1U rack server engineered for computing and virtualization workloads. Powered by 1 Intel Xeon E-2300 Series or Intel Pentium Processors (up to 8 cores, 95W TDP) across 4 memory slots supporting up to 128GB DDR4-3200 ECC UDIMM, the R350 balances throughput and memory capacity. In Dell's server catalog, the R350 succeeded the POWEREDGE-R340, positioned alongside rival systems including PROLIANT-DL20-GEN10-PLUS, THINKSYSTEM-SR250-V2.

Options and compatibility

Processor support on the R350 utilizes 1 LGA1200 sockets with thermal heatsinks matching CPU power envelopes. System memory slots on the R350 require DDR4-3200 ECC UDIMM modules, and mixing RDIMM with LRDIMM memory is not supported. Front backplanes on the R350 accommodate either DXD9H (2.5-inch SFF) or X7K8W (3.5-inch LFF) trays based on chassis option. Networking on the R350 uses OCP 3.0 mezzanine slot, and expansion cards install into Up to 3 PCIe Gen4 slots risers.

How to identify it

Physical identification of the R350 is verified by the 15th-generation high-airflow front security bezel with the R350 badge on the front chassis ear. The pull-out information tag on the R350 control panel displays the 7-character Dell Service Tag and default login credentials. In iDRAC9 Gen15, the server identifies as R350 with active firmware, slot mapping, and power telemetry.

Buying used

When evaluating a pre-owned R350, inspect the LGA1200 CPU socket pins for damage and ensure retention clips are intact. Run Dell ePSA diagnostics across all 4 memory slots of the R350 to verify zero uncorrectable ECC faults under load. Verify that redundant power supplies in the R350 match in wattage and that iDRAC9 Gen15 Enterprise remote console is enabled. Ensure required R350 drive caddies and bracket accessories are present.

Compatible parts

Bezels

Memory

SSDs

Network adapters

OCP adapters

Rail kits

RAID controllers

Boot devices

Works together

How the Dell PowerEdge R350 connects to servers, storage and the network: 4 ways, with the parts and products on each path.

Fibre Channel SANiSCSI and NVMe/TCP over EthernetDirect-attached SASFile storage (NFS and SMB)

Fibre Channel SAN

Match the speed: 16Gb and 32Gb FC HBAs, switches and array ports work together, and each generation also runs one or two speeds below its own (a 32Gb port runs at 16Gb and 8Gb).

Adapters for the server (check the fit list)

Switches

Storage

Optics

Fibre Channel SAN: how it fits together

iSCSI and NVMe/TCP over Ethernet

Keep the speed the same at all three points: a 25GbE server, a 25GbE switch port and a 25GbE array port. Mixed speeds work but the slowest link sets the pace.

Adapters for the server (check the fit list)

iSCSI and NVMe/TCP over Ethernet: how it fits together

Direct-attached SAS

12Gb SAS uses Mini-SAS HD (SFF-8644) connectors; older 6Gb gear uses Mini-SAS (SFF-8088). Adapter cables exist, but the link runs at the slower speed.

Adapters for the server (check the fit list)

Storage

Direct-attached SAS: how it fits together

File storage (NFS and SMB)

Front-end ports face the clients; back-end ports (on scale-out systems) connect the nodes to each other and need their own switch pair.

Adapters for the server (check the fit list)

Storage

File storage (NFS and SMB): how it fits together

Plan and size it

Equivalent models from other brands

FAQ

What RAM type does the PowerEdge R350 require?

It strictly requires DDR4-3200 ECC Unbuffered DIMMs (UDIMMs), up to 128GB across 4 slots.

Does the R350 support hot-plug redundant power supplies?

Yes, it supports dual redundant 600W hot-plug Platinum power supplies.

Buying or selling R350?

New, refurbished or used. Tell us the quantity and condition and we connect you with a vetted reseller in your region, usually within one working day.

Sources