Home › Servers › Dell

Dell PowerEdge T330

End of supportServerstower
Dell PowerEdge T330tower8 × LFF 3.5" bays1 socket4 DIMMs

The Dell PowerEdge T330 is an expandable single-socket tower server built for small business branch offices, medical practices, and retail locations needing enterprise storage resilience. Driven by an Intel Xeon E3-1200 v5 or v6 processor, it supports up to 64GB of DDR4 ECC unbuffered memory across 4 slots and holds up to eight hot-swap 3.5-inch hard drives. With dual redundant hot-plug power supplies and full iDRAC8 remote management, the T330 delivers high uptime in a quiet tower chassis. Pre-owned units are widely deployed as low-cost network-attached storage nodes. Buyers must verify ECC UDIMM memory compatibility.

Also written as: PowerEdge T330, Dell T330, T330 Tower Server

Buy Dell PowerEdge T330Sell yours

Specifications

BrandDell
FamilyPowerEdge T
Form factortower
ReleasedNov 2015
End of saleFeb 2019
End of supportMar 2024
Cpu sockets1
Cpu platformIntel Xeon E3-1200 v5 and E3-1200 v6 Series Processors (up to 4 cores, 80W TDP)
Memory slots4
Memory typeDDR4-2133 / DDR4-2400 ECC UDIMM
Memory max (GB)64
Drive baysUp to 8x 3.5-inch hot-swap SAS/SATA drives
Pcie slotsUp to 4 PCIe Gen3 slots
Gpu supportNone supported
Network onboard2x 1GbE embedded LOM ports; 1x 1GbE iDRAC8 port
Power supplyDual redundant hot-plug 495W Platinum or single 350W cabled

Generations

Compatible parts

RAID controllers

Other parts

Works together

How the Dell PowerEdge T330 connects to servers, storage and the network: 4 ways, with the parts and products on each path.

Fibre Channel SANiSCSI and NVMe/TCP over EthernetDirect-attached SASFile storage (NFS and SMB)

Fibre Channel SAN

Match the speed: 16Gb and 32Gb FC HBAs, switches and array ports work together, and each generation also runs one or two speeds below its own (a 32Gb port runs at 16Gb and 8Gb).

Adapters for the server (check the fit list)

Switches

Storage

Optics

Fibre Channel SAN: how it fits together

iSCSI and NVMe/TCP over Ethernet

Keep the speed the same at all three points: a 25GbE server, a 25GbE switch port and a 25GbE array port. Mixed speeds work but the slowest link sets the pace.

Adapters for the server (check the fit list)

Switches

iSCSI and NVMe/TCP over Ethernet: how it fits together

Direct-attached SAS

12Gb SAS uses Mini-SAS HD (SFF-8644) connectors; older 6Gb gear uses Mini-SAS (SFF-8088). Adapter cables exist, but the link runs at the slower speed.

Adapters for the server (check the fit list)

Storage

Direct-attached SAS: how it fits together

File storage (NFS and SMB)

Front-end ports face the clients; back-end ports (on scale-out systems) connect the nodes to each other and need their own switch pair.

Adapters for the server (check the fit list)

Switches

File storage (NFS and SMB): how it fits together

Plan and size it

Check compatibility with Dell

Before you buy, confirm the exact configuration against the vendor's own lists: firmware levels, operating systems, adapters and optics that Dell has tested with the Dell PowerEdge T330.

Equivalent models from other brands

Buying a used T330: what to check

Ensure memory is ECC unbuffered UDIMM (RDIMMs will not boot). Confirm all 8 drive caddies are provided, and test redundant power supplies.

FAQ

How many hard drives fit in the T330?

Up to eight 3.5-inch hot-swap SAS/SATA drives.

Does the T330 have redundant power supplies?

Yes, optional dual hot-plug 495W redundant power supplies are supported.

Buying or selling T330?

New, refurbished or used. Tell us the quantity and condition and we connect you with a vetted reseller in your region, usually within one working day.

Sources