Home › Servers › Dell

Dell PowerEdge T340

End of saleServerstower
Dell PowerEdge T340tower8 × LFF 3.5" bays1 socket4 DIMMs

The Dell PowerEdge T340 is an enterprise tower server powered by 1 Intel Xeon E-2100 and E-2200 Series, Core i3, or Pentium Processors (up to 8 cores, 95W TDP) and 4 memory slots supporting up to 64GB DDR4-2666 ECC UDIMM. Configured with Up to 8x 3.5-inch hot-swap SAS/SATA drives and Up to 4 PCIe Gen3 slots, the T340 delivers balanced compute and I/O density for enterprise database, hypervisor, and application workloads.

Also written as: PowerEdge T340, Dell T340, T340 Tower Server

Buy Dell PowerEdge T340Sell yours

Specifications

BrandDell
FamilyPowerEdge T
Form factortower
ReleasedNov 2018
End of saleOct 2022
End of supportNov 2027
Cpu sockets1
Cpu platformIntel Xeon E-2100 and E-2200 Series, Core i3, or Pentium Processors (up to 8 cores, 95W TDP)
Memory slots4
Memory typeDDR4-2666 ECC UDIMM
Memory max (GB)64
Drive baysUp to 8x 3.5-inch hot-swap SAS/SATA drives
Pcie slotsUp to 4 PCIe Gen3 slots
Gpu supportNone supported
Network onboard2x 1GbE embedded LOM ports; 1x 1GbE iDRAC9 port
Power supplyDual redundant hot-plug 495W Platinum or single 350W cabled

Generations

About the T340

The Dell PowerEdge T340 is an enterprise tower server engineered for computing and virtualization workloads. Powered by 1 Intel Xeon E-2100 and E-2200 Series, Core i3, or Pentium Processors (up to 8 cores, 95W TDP) across 4 memory slots supporting up to 64GB DDR4-2666 ECC UDIMM, the T340 balances throughput and memory capacity. In Dell's server catalog, the T340 succeeded the POWEREDGE-T330 and was followed by the POWEREDGE-T350, positioned alongside rival systems including PROLIANT-ML30-GEN10, THINKSYSTEM-ST250.

Options and compatibility

Processor support on the T340 utilizes 1 LGA1151 sockets with thermal heatsinks matching CPU power envelopes. System memory slots on the T340 require DDR4-2666 ECC UDIMM modules, and mixing RDIMM with LRDIMM memory is not supported. The T340 tower chassis accepts X7K8W (3.5-inch LFF) drive carriers depending on backplane selection. Networking on the T340 uses Network Daughter Card (NDC), and expansion cards install into Up to 4 PCIe Gen3 slots risers.

How to identify it

Physical identification of the T340 is verified by the 14th-generation silver-gray brushed aluminum honeycomb bezel with the T340 badge on the front chassis ear. The pull-out information tag on the T340 control panel displays the 7-character Dell Service Tag and default login credentials. In iDRAC9, the server identifies as T340 with active firmware, slot mapping, and power telemetry.

Buying used

When evaluating a pre-owned T340, inspect the LGA1151 CPU socket pins for damage and ensure retention clips are intact. Run Dell ePSA diagnostics across all 4 memory slots of the T340 to verify zero uncorrectable ECC faults under load. Verify that redundant power supplies in the T340 match in wattage and that iDRAC9 Enterprise remote console is enabled. Ensure required T340 drive caddies and bracket accessories are present.

Compatible parts

Hard drives

RAID controllers

Works together

How the Dell PowerEdge T340 connects to servers, storage and the network: 4 ways, with the parts and products on each path.

Fibre Channel SANiSCSI and NVMe/TCP over EthernetDirect-attached SASFile storage (NFS and SMB)

Fibre Channel SAN

Match the speed: 16Gb and 32Gb FC HBAs, switches and array ports work together, and each generation also runs one or two speeds below its own (a 32Gb port runs at 16Gb and 8Gb).

Adapters for the server (check the fit list)

Switches

Storage

Optics

Fibre Channel SAN: how it fits together

iSCSI and NVMe/TCP over Ethernet

Keep the speed the same at all three points: a 25GbE server, a 25GbE switch port and a 25GbE array port. Mixed speeds work but the slowest link sets the pace.

Adapters for the server (check the fit list)

iSCSI and NVMe/TCP over Ethernet: how it fits together

Direct-attached SAS

12Gb SAS uses Mini-SAS HD (SFF-8644) connectors; older 6Gb gear uses Mini-SAS (SFF-8088). Adapter cables exist, but the link runs at the slower speed.

Adapters for the server (check the fit list)

Storage

Direct-attached SAS: how it fits together

File storage (NFS and SMB)

Front-end ports face the clients; back-end ports (on scale-out systems) connect the nodes to each other and need their own switch pair.

Adapters for the server (check the fit list)

Storage

File storage (NFS and SMB): how it fits together

Plan and size it

Equivalent models from other brands

FAQ

How many hard drives does the T340 hold?

Up to eight 3.5-inch hot-swap SAS/SATA hard drives, supporting up to 112TB of raw capacity.

Can the T340 use registered RAM?

No, it strictly requires DDR4 ECC Unbuffered DIMMs (UDIMMs).

Buying or selling T340?

New, refurbished or used. Tell us the quantity and condition and we connect you with a vetted reseller in your region, usually within one working day.

Sources