Home › Servers › Dell

Dell PowerEdge T430

End of supportServerstower
Dell PowerEdge T430tower16 × SFF 2.5" bays2 sockets12 DIMMs

The Dell PowerEdge T430 is an enterprise tower server powered by 2 Intel Xeon E5-2600 v3 and E5-2600 v4 Series Processors (up to 135W TDP) and 12 memory slots supporting up to 384GB DDR4-2133 / DDR4-2400 RDIMM. Configured with Up to 16x 2.5-inch SAS/SATA or 8x 3.5-inch SAS/SATA drives and Up to 6 PCIe Gen3 slots, the T430 delivers balanced compute and I/O density for enterprise database, hypervisor, and application workloads.

Also written as: PowerEdge T430, Dell T430, T430 Tower Server

Buy Dell PowerEdge T430Sell yours

Specifications

BrandDell
FamilyPowerEdge T
Form factortower
ReleasedNov 2014
End of saleJul 2018
End of supportNov 2023
Cpu sockets2
Cpu platformIntel Xeon E5-2600 v3 and E5-2600 v4 Series Processors (up to 135W TDP)
Memory slots12
Memory typeDDR4-2133 / DDR4-2400 RDIMM
Memory max (GB)384
Drive baysUp to 16x 2.5-inch SAS/SATA or 8x 3.5-inch SAS/SATA drives
Pcie slotsUp to 6 PCIe Gen3 slots
Gpu supportNone supported
Network onboard2x 1GbE embedded LOM ports; 1x 1GbE iDRAC8 port
Power supplyDual redundant hot-plug 495W, 750W or single 450W cabled

Generations

About the T430

The Dell PowerEdge T430 is an enterprise tower server engineered for computing and virtualization workloads. Powered by 2 Intel Xeon E5-2600 v3 and E5-2600 v4 Series Processors (up to 135W TDP) across 12 memory slots supporting up to 384GB DDR4-2133 / DDR4-2400 RDIMM, the T430 balances throughput and memory capacity. In Dell's server catalog, the T430 succeeded the POWEREDGE-T420 and was followed by the POWEREDGE-T440, positioned alongside rival systems including PROLIANT-ML110-GEN9.

Options and compatibility

Processor support on the T430 utilizes 2 LGA2011-v3 sockets with thermal heatsinks matching CPU power envelopes. System memory slots on the T430 require DDR4-2133 / DDR4-2400 RDIMM modules, and mixing RDIMM with LRDIMM memory is not supported. The T430 tower chassis accepts F238F (3.5-inch LFF) drive carriers depending on backplane selection. Networking on the T430 uses Rack Network Daughter Card (rNDC), and expansion cards install into Up to 6 PCIe Gen3 slots risers.

How to identify it

Physical identification of the T430 is verified by the 13th-generation black matte honeycomb front bezel with the T430 badge on the front chassis ear. The pull-out information tag on the T430 control panel displays the 7-character Dell Service Tag and default login credentials. In iDRAC8, the server identifies as T430 with active firmware, slot mapping, and power telemetry.

Buying used

When evaluating a pre-owned T430, inspect the LGA2011-v3 CPU socket pins for damage and ensure retention clips are intact. Run Dell ePSA diagnostics across all 12 memory slots of the T430 to verify zero uncorrectable ECC faults under load. Verify that redundant power supplies in the T430 match in wattage and that iDRAC8 Enterprise remote console is enabled. Ensure required T430 drive caddies and bracket accessories are present.

Compatible parts

Power supplies

Other parts

RAID controllers

Works together

How the Dell PowerEdge T430 connects to servers, storage and the network: 4 ways, with the parts and products on each path.

Fibre Channel SANiSCSI and NVMe/TCP over EthernetDirect-attached SASFile storage (NFS and SMB)

Fibre Channel SAN

Match the speed: 16Gb and 32Gb FC HBAs, switches and array ports work together, and each generation also runs one or two speeds below its own (a 32Gb port runs at 16Gb and 8Gb).

Adapters for the server (check the fit list)

Switches

Storage

Optics

Fibre Channel SAN: how it fits together

iSCSI and NVMe/TCP over Ethernet

Keep the speed the same at all three points: a 25GbE server, a 25GbE switch port and a 25GbE array port. Mixed speeds work but the slowest link sets the pace.

Adapters for the server (check the fit list)

iSCSI and NVMe/TCP over Ethernet: how it fits together

Direct-attached SAS

12Gb SAS uses Mini-SAS HD (SFF-8644) connectors; older 6Gb gear uses Mini-SAS (SFF-8088). Adapter cables exist, but the link runs at the slower speed.

Adapters for the server (check the fit list)

Storage

Direct-attached SAS: how it fits together

File storage (NFS and SMB)

Front-end ports face the clients; back-end ports (on scale-out systems) connect the nodes to each other and need their own switch pair.

Adapters for the server (check the fit list)

Storage

File storage (NFS and SMB): how it fits together

Plan and size it

Equivalent models from other brands

FAQ

What processors work in the T430?

Dual Intel Xeon E5-2600 v3 and v4 processors up to 135W TDP.

What is the memory limit of the T430?

Up to 384GB of DDR4 memory across 12 DIMM slots using 32GB RDIMMs.

Buying or selling T430?

New, refurbished or used. Tell us the quantity and condition and we connect you with a vetted reseller in your region, usually within one working day.

Sources