Home › Parts › HPE part numbers

P9M76A: HPE StoreFabric SN1600Q 32Gb 2-port Fibre Channel Host Bus Adapter

HPE P9M76A HBAPCIe 3.0 x832GbLow profile PCIe card wi
HPEHBAsPCIe 3.0 x8

Also listed as: 870064-001, 853010-001, QLE2742-HP, SN1600Q-2P · made by QLogic

The HPE StoreFabric SN1600Q (P9M76A) is a dual-port 32Gb Gen 6 Fibre Channel host bus adapter powered by the Marvell QLogic QLE2742 ASIC. Designed for enterprise ProLiant Gen10 and Gen11 servers connecting to all-flash storage arrays, it delivers up to 1.3 million IOPS across two 32Gb SFP+ ports. It provides complete hardware offloading for concurrent SCSI and NVMe over Fibre Channel (NVMe/FC) protocols and integrates with Brocade StorFusion fabric diagnostics. Two genuine 32Gb short wave optical transceivers are included.

Buy P9M76ASell yours

Specifications

Part numberP9M76A
BrandHPE
Made byQLogic
TypeHBAs
Other numbers870064-001, 853010-001, QLE2742-HP, SN1600Q-2P
Statuscurrent
InterfacePCIe 3.0 x8
Form factorLow profile PCIe card with full-height and low-profile brackets
Ports2x 32Gb Fibre Channel SFP+ optical ports (includes 2x 32Gb SW optics)
Speed32Gb, 16Gb, and 8Gb FC auto-negotiation
Generation fitHPE ProLiant Gen10 and Gen11 servers

About the P9M76A

P9M76A (StoreFabric SN1600Q) is HPE's dual-port Gen 6 32Gb Fibre Channel host bus adapter for ProLiant Gen10 and Gen11 servers, based on the Marvell QLogic QLE2742 ASIC. It delivers 1.3 million aggregate IOPS and full line-rate 32Gb/s performance per port, supporting dual-fabric SAN redundancy and concurrent NVMe/FC and SCSI storage processing.

Compatibility

Compatible with HPE ProLiant DL380 Gen10, DL380 Gen10 Plus, DL380 Gen11, DL360 Gen10, and DL360 Gen11 servers. Fits standard PCIe 3.0 or 4.0 x8 or x16 slots. Fully qualified on HPE SPOCK with HPE StoreFabric SN3600B, SN6600B, SN6700B, and Cisco MDS fabrics, supporting HPE Alletra and MSA arrays.

How to identify a genuine unit

The low-profile board features two SFP+ cages side-by-side with a black aluminum passive heatsink. The HPE barcode label displays option part number P9M76A, spare part number 870064-001, and assembly 853010-001. System utilities report QLogic vendor ID 1077 and HPE subsystem vendor ID 103C.

Buying used

Inspect both SFP+ optical ports for clean pins and proper latching. Verify that the two included transceivers are authentic HPE 32Gb short wave optics. Check that the adapter enters the QLogic Fast!UTIL setup menu during boot and verifies cleanly in HPE iLO diagnostics.

Reference prices (last 12 months, updated 2026-10-27)

Used: USD 285 (1 sighting, Oct 2026)

All sightings
SellerConditionPriceNoteSeen
serversupply.comusedUSD 285Tested dual-port QLogic 32Gb FC adapter with 2x genuine optics2026-10-27

Prices seen on public listings on the dates shown, before tax and shipping. Not an offer.

Fits these models

Works together

How the HPE P9M76A connects to servers, storage and the network: 1 way, with the hardware on each path.

Fibre Channel SAN

Fibre Channel SAN

Match the speed: 16Gb and 32Gb FC HBAs, switches and array ports work together, and each generation also runs one or two speeds below its own (a 32Gb port runs at 16Gb and 8Gb).

Switches

Storage

Optics

Fibre Channel SAN: how it fits together

Plan and size it

Check compatibility with HPE

Before you buy, confirm the exact configuration against the vendor's own lists: firmware levels, operating systems, adapters and optics that HPE has tested with the HPE P9M76A.

Equivalent part numbers

FAQ

What is the spare part number for the P9M76A adapter?

The HPE spare part number is 870064-001, corresponding to board assembly 853010-001.

Does the SN1600Q support Brocade StorFusion diagnostics?

Yes, it integrates with Brocade Fabric Vision and StorFusion technology for cable and link diagnostics.

Buying or selling P9M76A?

New, refurbished or used. Tell us the quantity and condition and we connect you with a vetted reseller in your region, usually within one working day.

Buy P9M76ASell yours

Sources