Home › Servers › Dell

Dell PowerEdge XE8545

CurrentServers4U rack
Dell PowerEdge XE85454U rack8 × SFF 2.5" bays2 sockets32 DIMMs

The Dell PowerEdge XE8545 is an enterprise 4U rack server powered by 2 AMD EPYC 7002 and 7003 Series Processors (up to 2x 64 cores, 280W cTDP) and 32 memory slots supporting up to 4096GB DDR4-3200 RDIMM / LRDIMM. Configured with Up to 8x 2.5-inch NVMe direct-attach SSDs and Up to 4 PCIe Gen4 slots, the XE8545 delivers balanced compute and I/O density for enterprise database, hypervisor, and application workloads.

Also written as: PowerEdge XE8545, Dell XE8545, XE8545 GPU Server

Buy Dell PowerEdge XE8545Sell yours

Specifications

BrandDell
FamilyPowerEdge XE
Form factor4U rack
ReleasedApr 2021
Cpu sockets2
Cpu platformAMD EPYC 7002 and 7003 Series Processors (up to 2x 64 cores, 280W cTDP)
Memory slots32
Memory typeDDR4-3200 RDIMM / LRDIMM
Memory max (GB)4,096
Drive baysUp to 8x 2.5-inch NVMe direct-attach SSDs
Pcie slotsUp to 4 PCIe Gen4 slots
Gpu support4x NVIDIA A100 SXM4 GPUs with NVLink (400W or 500W each, 40GB or 80GB)
Network onboardOCP 3.0 mezzanine slot; 1x 1GbE iDRAC9 port
Power supplyQuad hot-plug 2400W Platinum power supplies (2+2)

Generations

About the XE8545

The Dell PowerEdge XE8545 is an enterprise 4U rack server engineered for computing and virtualization workloads. Powered by 2 AMD EPYC 7002 and 7003 Series Processors (up to 2x 64 cores, 280W cTDP) across 32 memory slots supporting up to 4096GB DDR4-3200 RDIMM / LRDIMM, the XE8545 balances throughput and memory capacity. In Dell's server catalog, the XE8545 was followed by the POWEREDGE-XE8640, positioned alongside rival systems including NVIDIA-DGX-A100, SUPERMICRO-GPU-4U.

Options and compatibility

Processor support on the XE8545 utilizes 2 Socket SP3 sockets with thermal heatsinks matching CPU power envelopes. System memory slots on the XE8545 require DDR4-3200 RDIMM / LRDIMM modules, and mixing RDIMM with LRDIMM memory is not supported. The XE8545 chassis utilizes DXD9H (2.5-inch SFF) drive trays across its 2.5-inch drive backplane bays. Networking on the XE8545 uses OCP 3.0 mezzanine slot, and expansion cards install into Up to 4 PCIe Gen4 slots risers.

How to identify it

Physical identification of the XE8545 is verified by the 15th-generation high-airflow front security bezel with the XE8545 badge on the front chassis ear. The pull-out information tag on the XE8545 control panel displays the 7-character Dell Service Tag and default login credentials. In iDRAC9 Gen15, the server identifies as XE8545 with active firmware, slot mapping, and power telemetry.

Buying used

When evaluating a pre-owned XE8545, inspect the Socket SP3 CPU socket pins for damage and ensure retention clips are intact. Run Dell ePSA diagnostics across all 32 memory slots of the XE8545 to verify zero uncorrectable ECC faults under load. Verify that redundant power supplies in the XE8545 match in wattage and that iDRAC9 Gen15 Enterprise remote console is enabled. Ensure required XE8545 drive caddies and bracket accessories are present.

Compatible parts

Memory

Transceivers

Power supplies

Cables

Network adapters

Boot devices

Works together

How the Dell PowerEdge XE8545 connects to servers, storage and the network: 5 ways, with the parts and products on each path.

Fibre Channel SANiSCSI and NVMe/TCP over EthernetDirect-attached SASFile storage (NFS and SMB)GPU cluster fabric

Fibre Channel SAN

Match the speed: 16Gb and 32Gb FC HBAs, switches and array ports work together, and each generation also runs one or two speeds below its own (a 32Gb port runs at 16Gb and 8Gb).

Adapters for the server (check the fit list)

Switches

Storage

Optics

Fibre Channel SAN: how it fits together

iSCSI and NVMe/TCP over Ethernet

Keep the speed the same at all three points: a 25GbE server, a 25GbE switch port and a 25GbE array port. Mixed speeds work but the slowest link sets the pace.

Adapters for the server (check the fit list)

iSCSI and NVMe/TCP over Ethernet: how it fits together

Direct-attached SAS

12Gb SAS uses Mini-SAS HD (SFF-8644) connectors; older 6Gb gear uses Mini-SAS (SFF-8088). Adapter cables exist, but the link runs at the slower speed.

Adapters for the server (check the fit list)

Storage

Direct-attached SAS: how it fits together

File storage (NFS and SMB)

Front-end ports face the clients; back-end ports (on scale-out systems) connect the nodes to each other and need their own switch pair.

Adapters for the server (check the fit list)

Storage

File storage (NFS and SMB): how it fits together

GPU cluster fabric

InfiniBand adapters and switches must match the generation: HDR is 200Gb, NDR is 400Gb. VPI adapters such as ConnectX-6 and ConnectX-7 can run either InfiniBand or Ethernet.

GPUs

Adapters for the server

GPU cluster fabric: how it fits together

Plan and size it

Equivalent models from other brands

FAQ

What GPUs are in the PowerEdge XE8545?

Four NVIDIA A100 SXM4 GPUs (400W or 500W versions with 40GB or 80GB HBM2e memory) connected via NVLink.

What processors power the XE8545?

Dual AMD EPYC 7002 or 7003 series processors up to 64 cores each (128 cores total).

Buying or selling XE8545?

New, refurbished or used. Tell us the quantity and condition and we connect you with a vetted reseller in your region, usually within one working day.

Sources