Home › Servers › HPE

HPE Edgeline EL8000t Converged Edge System

CurrentServers1U/2U short-depth rack
HPE Edgeline EL8000t Converged Edge System1U/2U short-depth rack

The HPE Edgeline EL8000t is a ruggedized short-depth converged edge system built for telecommunications edge computing, vRAN, and 5G cellular distribution. Designed to NEBS Level 3 and ETSI compliance standards, it delivers high performance Intel Xeon processing and PCIe expansion in space-constrained cell tower base stations.

Buy HPE Edgeline EL8000t Converged Edge SystemSell yours

Specifications

BrandHPE
FamilyEdgeline
Form factor1U/2U short-depth rack
ReleasedFeb 2020
ProcessorIntel Xeon Scalable 1st or 2nd Generation processors on modular server blades
Chassis depthUltra-short 17-inch (430mm) depth chassis fitting standard telco racks
RuggedizationNEBS Level 3 and ETSI compliant, operating temperature from 0 to 55 degrees Celsius
ExpansionMultiple PCIe Gen3 slots supporting FPGA and accelerator cards
PowerDual redundant hot-plug AC or -48V DC power supplies

Compatible parts

Memory

Hard drives

Works together

How the HPE Edgeline EL8000t Converged Edge System connects to servers, storage and the network: 4 ways, with the parts and products on each path.

Fibre Channel SANiSCSI and NVMe/TCP over EthernetDirect-attached SASFile storage (NFS and SMB)

Fibre Channel SAN

Match the speed: 16Gb and 32Gb FC HBAs, switches and array ports work together, and each generation also runs one or two speeds below its own (a 32Gb port runs at 16Gb and 8Gb).

Adapters for the server (check the fit list)

Switches

Storage

Optics

Fibre Channel SAN: how it fits together

iSCSI and NVMe/TCP over Ethernet

Keep the speed the same at all three points: a 25GbE server, a 25GbE switch port and a 25GbE array port. Mixed speeds work but the slowest link sets the pace.

Adapters for the server (check the fit list)

Switches

Storage

Optics

iSCSI and NVMe/TCP over Ethernet: how it fits together

Direct-attached SAS

12Gb SAS uses Mini-SAS HD (SFF-8644) connectors; older 6Gb gear uses Mini-SAS (SFF-8088). Adapter cables exist, but the link runs at the slower speed.

Adapters for the server (check the fit list)

Storage

Direct-attached SAS: how it fits together

File storage (NFS and SMB)

Front-end ports face the clients; back-end ports (on scale-out systems) connect the nodes to each other and need their own switch pair.

Adapters for the server (check the fit list)

Switches

Storage

Optics

File storage (NFS and SMB): how it fits together

Plan and size it

Check compatibility with HPE

Before you buy, confirm the exact configuration against the vendor's own lists: firmware levels, operating systems, adapters and optics that HPE has tested with the HPE Edgeline EL8000t Converged Edge System.

Equivalent models from other brands

FAQ

What certifications does the Edgeline EL8000t possess for telco use?

It is certified for NEBS Level 3 and ETSI standards for deployment in cell site base stations.

Does the EL8000t support DC power input?

Yes, it supports dual redundant minus 48V DC power supplies standard in telecom environments.

Buying or selling Edgeline EL8000t Converged Edge System?

New, refurbished or used. Tell us the quantity and condition and we connect you with a vetted reseller in your region, usually within one working day.

Sources