Home › Servers › HPE

HPE ProLiant ML30 Gen10 Plus

End of saleServerstower
HPE ProLiant ML30 Gen10 Plustower4 × LFF 3.5" bays1 socket4 DIMMs

The HPE ProLiant ML30 Gen10 Plus is an upgraded 4U tower server driven by Intel Xeon E-2300 processors with PCIe 4.0 expansion and support for up to 128GB of DDR4-3200 memory. Built with enterprise-class iLO 5 management and high storage capacity in a quiet chassis, it handles small business ERP systems, local virtualization, and edge file/print infrastructure efficiently.

Also written as: ML30 G10 Plus, ML30Gen10Plus, ProLiant ML30 Gen 10 Plus

Buy HPE ProLiant ML30 Gen10 PlusSell yours

Specifications

BrandHPE
FamilyProLiant ML
Form factortower
ReleasedOct 2021
End of saleMar 2024
Cpu sockets1
Cpu platformIntel Xeon E-2300 series or Pentium
Memory slots4
Memory typeDDR4-3200 ECC UDIMM
Memory max (GB)128
Drive baysUp to 4 LFF or 8 SFF hot-plug or non-hot-plug SATA/SAS
Pcie slots4 PCIe expansion slots (including 1x PCIe 4.0 x16)
Power supply350W fixed or 500W Flex Slot redundant hot-plug

Generations

Works together

How the HPE ProLiant ML30 Gen10 Plus connects to servers, storage and the network: 4 ways, with the parts and products on each path.

Fibre Channel SANiSCSI and NVMe/TCP over EthernetDirect-attached SASFile storage (NFS and SMB)

Fibre Channel SAN

Match the speed: 16Gb and 32Gb FC HBAs, switches and array ports work together, and each generation also runs one or two speeds below its own (a 32Gb port runs at 16Gb and 8Gb).

Adapters for the server (check the fit list)

Switches

Storage

Optics

Fibre Channel SAN: how it fits together

iSCSI and NVMe/TCP over Ethernet

Keep the speed the same at all three points: a 25GbE server, a 25GbE switch port and a 25GbE array port. Mixed speeds work but the slowest link sets the pace.

Adapters for the server (check the fit list)

Switches

Storage

Optics

iSCSI and NVMe/TCP over Ethernet: how it fits together

Direct-attached SAS

12Gb SAS uses Mini-SAS HD (SFF-8644) connectors; older 6Gb gear uses Mini-SAS (SFF-8088). Adapter cables exist, but the link runs at the slower speed.

Adapters for the server (check the fit list)

Storage

Direct-attached SAS: how it fits together

File storage (NFS and SMB)

Front-end ports face the clients; back-end ports (on scale-out systems) connect the nodes to each other and need their own switch pair.

Adapters for the server (check the fit list)

Switches

Storage

Optics

File storage (NFS and SMB): how it fits together

Plan and size it

Check compatibility with HPE

Before you buy, confirm the exact configuration against the vendor's own lists: firmware levels, operating systems, adapters and optics that HPE has tested with the HPE ProLiant ML30 Gen10 Plus.

Equivalent models from other brands

FAQ

What PCIe bus version does the ML30 Gen10 Plus support?

It supports PCIe 4.0 on its primary x16 slot for modern high-speed storage or network cards.

What is the maximum RAM capacity of the ML30 Gen10 Plus?

It supports up to 128GB of DDR4-3200 UDIMM memory across 4 slots using 32GB modules.

Buying or selling ML30 Gen10 Plus?

New, refurbished or used. Tell us the quantity and condition and we connect you with a vetted reseller in your region, usually within one working day.

Sources