Home › Servers › HPE

HPE Apollo 4510 Gen10

End of saleServers4U rack
HPE Apollo 4510 Gen104U rack60 × LFF 3.5" bays2 sockets

The HPE Apollo 4510 Gen10 is an enterprise 4U bulk storage system engineered for massive object storage, active archives, and unstructured content repositories. Featuring top-loading drive drawers that house up to 60 LFF 3.5-inch hard drives powered by a dual-socket Intel Xeon Scalable server node, it maximizes petabyte-scale storage density per standard enterprise rack.

Also written as: Apollo 4510 G10, Apollo 4510Gen10

Buy HPE Apollo 4510 Gen10Sell yours

Specifications

BrandHPE
FamilyApollo
Form factor4U rack
ReleasedJun 2018
End of saleJun 2022
Cpu sockets2
Cpu platformIntel Xeon Scalable 1st and 2nd Gen processors up to 26 cores
Memory slots16
Memory typeDDR4-2666 / DDR4-2933 SmartMemory RDIMM / LRDIMM
Memory max (GB)1,024
Drive baysUp to 60 LFF top-loading drive bays plus rear SFF drives
Pcie slotsUp to 4 PCIe 3.0 expansion slots plus FlexibleLOM
Power supplyUp to 4x 800W or 1600W Flex Slot Platinum hot-plug

Generations

Works together

How the HPE Apollo 4510 Gen10 connects to servers, storage and the network: 4 ways, with the parts and products on each path.

Fibre Channel SANiSCSI and NVMe/TCP over EthernetDirect-attached SASFile storage (NFS and SMB)

Fibre Channel SAN

Match the speed: 16Gb and 32Gb FC HBAs, switches and array ports work together, and each generation also runs one or two speeds below its own (a 32Gb port runs at 16Gb and 8Gb).

Adapters for the server (check the fit list)

Switches

Storage

Optics

Fibre Channel SAN: how it fits together

iSCSI and NVMe/TCP over Ethernet

Keep the speed the same at all three points: a 25GbE server, a 25GbE switch port and a 25GbE array port. Mixed speeds work but the slowest link sets the pace.

Adapters for the server (check the fit list)

Switches

Storage

Optics

iSCSI and NVMe/TCP over Ethernet: how it fits together

Direct-attached SAS

12Gb SAS uses Mini-SAS HD (SFF-8644) connectors; older 6Gb gear uses Mini-SAS (SFF-8088). Adapter cables exist, but the link runs at the slower speed.

Adapters for the server (check the fit list)

Storage

Direct-attached SAS: how it fits together

File storage (NFS and SMB)

Front-end ports face the clients; back-end ports (on scale-out systems) connect the nodes to each other and need their own switch pair.

Adapters for the server (check the fit list)

Switches

Storage

Optics

File storage (NFS and SMB): how it fits together

Plan and size it

Check compatibility with HPE

Before you buy, confirm the exact configuration against the vendor's own lists: firmware levels, operating systems, adapters and optics that HPE has tested with the HPE Apollo 4510 Gen10.

Equivalent models from other brands

FAQ

How many hard drives can be installed in the Apollo 4510 Gen10?

It holds up to 60 top-loading LFF 3.5-inch drives in two pull-out drawers, plus optional rear SFF boot/cache drives.

Can the Apollo 4510 Gen10 drives be serviced without shutting down?

Yes, the top-loading drawers pull out smoothly on cable-management arms allowing hot-swap replacement during operation.

Buying or selling Apollo 4510 Gen10?

New, refurbished or used. Tell us the quantity and condition and we connect you with a vetted reseller in your region, usually within one working day.

Sources