Home › Servers › HPE

HPE ProLiant DL20 Gen10

End of saleServers1U rack
HPE ProLiant DL20 Gen101U rack2 × LFF 3.5" bays1 socket4 DIMMs

The HPE ProLiant DL20 Gen10 is an efficient 1U single-socket compact rack server designed for small businesses, transportable edge deployments, and retail branch infrastructure. Powered by Intel Xeon E-2100 and E-2200 processors, it incorporates HPE Silicon Root of Trust security and iLO 5 management in a short 15.05-inch chassis. It is widely traded in secondary markets for network routing and localized edge compute.

Also written as: DL20 G10, DL20Gen10, ProLiant DL20 Gen 10

Buy HPE ProLiant DL20 Gen10Sell yours

Specifications

BrandHPE
FamilyProLiant DL
Form factor1U rack
ReleasedOct 2018
End of saleApr 2022
Cpu sockets1
Cpu platformIntel Xeon E-2100 / E-2200 series, Core i3, Pentium
Memory slots4
Memory typeDDR4-2666 ECC UDIMM
Memory max (GB)64
Drive baysUp to 2 LFF or 4 to 6 SFF hot-plug or non-hot-plug SATA/SAS
Pcie slots2 PCIe 3.0 expansion slots
Power supply290W fixed or 500W Flex Slot redundant hot-plug

Generations

Works together

How the HPE ProLiant DL20 Gen10 connects to servers, storage and the network: 4 ways, with the parts and products on each path.

Fibre Channel SANiSCSI and NVMe/TCP over EthernetDirect-attached SASFile storage (NFS and SMB)

Fibre Channel SAN

Match the speed: 16Gb and 32Gb FC HBAs, switches and array ports work together, and each generation also runs one or two speeds below its own (a 32Gb port runs at 16Gb and 8Gb).

Adapters for the server (check the fit list)

Switches

Storage

Optics

Fibre Channel SAN: how it fits together

iSCSI and NVMe/TCP over Ethernet

Keep the speed the same at all three points: a 25GbE server, a 25GbE switch port and a 25GbE array port. Mixed speeds work but the slowest link sets the pace.

Adapters for the server (check the fit list)

Switches

Storage

Optics

iSCSI and NVMe/TCP over Ethernet: how it fits together

Direct-attached SAS

12Gb SAS uses Mini-SAS HD (SFF-8644) connectors; older 6Gb gear uses Mini-SAS (SFF-8088). Adapter cables exist, but the link runs at the slower speed.

Adapters for the server (check the fit list)

Storage

Direct-attached SAS: how it fits together

File storage (NFS and SMB)

Front-end ports face the clients; back-end ports (on scale-out systems) connect the nodes to each other and need their own switch pair.

Adapters for the server (check the fit list)

Switches

Storage

Optics

File storage (NFS and SMB): how it fits together

Plan and size it

Check compatibility with HPE

Before you buy, confirm the exact configuration against the vendor's own lists: firmware levels, operating systems, adapters and optics that HPE has tested with the HPE ProLiant DL20 Gen10.

Equivalent models from other brands

FAQ

What is the chassis depth of the DL20 Gen10?

The chassis depth is approximately 15.05 inches (38.22 cm), enabling installation in short-depth wall racks and transportable cases.

What management processor is built into the DL20 Gen10?

It integrates HPE Integrated Lights-Out 5 (iLO 5) ASIC with hardware-level Silicon Root of Trust protection.

Buying or selling DL20 Gen10?

New, refurbished or used. Tell us the quantity and condition and we connect you with a vetted reseller in your region, usually within one working day.

Sources